Details

---

BUY EP8302 https://www.utsource.net/itm/p/12608836.html

Parameter	Description	Value
Part Number	Component Identifier	EP8302
Function	Device Functionality	Dual 4-bit Video Line Driver with Sync Processing
Supply Voltage (VCC)	Operating Voltage Range	4.5V to 5.5V
Operating Temperature Range	Temperature Range for Normal Operation	-40掳C to +85掳C
Input Voltage Range	Range of Input Voltages	0V to VCC
Output Voltage Swing	Output Voltage Range	0V to VCC - 0.5V
Propagation Delay (tPD)	Time Delay from Input to Output	10ns (Typical)
Skew (tSKW)	Maximum Difference in Propagation Delay Between Channels	1ns (Maximum)
Power Dissipation	Maximum Power Consumption	250mW
Package	Physical Package Type	SOIC-16
Pin Count	Number of Pins	16

Instructions for Use

1. Power Supply:

   • Connect the VCC pin to a stable 5V power supply.
   • Connect the GND pin to the system ground.

2. Signal Connections:

   • Connect the input video signals to the appropriate input pins (IN1, IN2, IN3, IN4).
   • Connect the output video signals to the appropriate output pins (OUT1, OUT2, OUT3, OUT4).

3. Sync Processing:

   • The EP8302 automatically processes sync signals. Ensure that the sync signals are correctly connected to the sync input pins (HSYNC, VSYNC).

4. Enable/Disable:

   • Use the enable pin (EN) to control the operation of the device. Set EN to high to enable the driver, and low to disable it.

5. Temperature Considerations:

   • Ensure that the operating temperature remains within the specified range to avoid damage or malfunction.

6. Layout Guidelines:

   • Place the EP8302 close to the video signal sources and destinations to minimize signal degradation.
   • Use short, well-shielded traces for video signals to reduce noise and interference.

7. Decoupling Capacitors:

   • Place a 0.1渭F ceramic decoupling capacitor between VCC and GND as close to the device as possible to filter out high-frequency noise.

8. Storage and Handling:

   • Store the EP8302 in a dry, static-free environment.
   • Handle the device with care to avoid damaging the pins or the internal circuitry.

(For reference only)