Details

---

BUY G5Q-1-ST-DC12V https://www.utsource.net/itm/p/12608867.html

Parameter	Value
Model	G5Q-1-ST-DC12V
Type	Relay
Coil Voltage	DC 12V
Coil Current	30 mA (max)
Contact Form	SPST (Single Pole, Single Throw)
Contact Rating	10A at 250VAC (resistive load)
Insulation Resistance	100 M惟 (min) at 500VDC
Dielectric Strength	2500VAC for 1 minute
Mechanical Life	10 million operations
Electrical Life	100,000 operations (resistive load)
Operating Temperature	-40掳C to +85掳C
Storage Temperature	-40掳C to +85掳C
Terminal Type	Pin terminals
Dimensions	17.5 x 10.5 x 12.5 mm
Weight	3.5 g

Instructions:

1. Installation:

   • Ensure the relay is installed in a location with adequate ventilation to prevent overheating.
   • Use the provided pin terminals to connect the relay to your circuit.

2. Coil Connection:

   • Connect the coil terminals to a DC 12V power source. The positive terminal should be connected to the "+" pin, and the negative terminal to the "-" pin.

3. Contact Connection:

   • Connect the load to the common (COM) and normally open (NO) or normally closed (NC) contacts as required by your application.

4. Operation:

   • When the coil is energized, the normally open (NO) contact will close, completing the circuit between COM and NO.
   • When the coil is de-energized, the normally open (NO) contact will open, breaking the circuit between COM and NO.

5. Maintenance:

   • Regularly inspect the relay for any signs of wear or damage.
   • Do not exceed the maximum ratings specified in the parameter table to avoid damaging the relay.

6. Storage:

   • Store the relay in a dry, cool place away from direct sunlight and extreme temperatures.

7. Safety:

   • Always ensure the power is disconnected before handling the relay.
   • Follow all local electrical codes and regulations when installing and using the relay.

(For reference only)