Details

---

BUY 30ETH06 https://www.utsource.net/itm/p/12608868.html

Parameter	Value	Unit
Part Number	30ETH06	-
Type	Triac	-
Maximum RMS Voltage	400	V
Maximum RMS Current	30	A
Maximum Surge Current (I2t)	1500	A2s
Power Dissipation	200	W
Isolation Voltage	2500	V
Operating Temperature	-40 to +125	掳C
Mounting Type	Through-hole	-
Package	TO-220	-

Instructions for Use:

1. Handling:

   • Handle the 30ETH06 with care to avoid damage to the leads or the body.
   • Avoid touching the pins or the body with bare hands to prevent static discharge.

2. Mounting:

   • Ensure proper heat dissipation by mounting the 30ETH06 on a heatsink if necessary.
   • Use appropriate mounting hardware to secure the device without excessive force on the leads.

3. Electrical Connections:

   • Connect the main terminals (MT1 and MT2) to the load and power supply.
   • Connect the gate terminal (G) to the control circuit.
   • Ensure all connections are secure and free from short circuits.

4. Operational Limits:

   • Do not exceed the maximum RMS voltage and current ratings.
   • Ensure the ambient temperature is within the specified operating range.
   • Monitor the power dissipation and use a heatsink if the device exceeds its thermal limits.

5. Testing:

   • Before applying power, verify all connections and ensure the control circuit is functioning correctly.
   • Test the device under controlled conditions to ensure it operates as expected.

6. Storage:

   • Store the 30ETH06 in a dry, cool place away from direct sunlight and sources of heat.
   • Keep the device in its original packaging until ready for use to protect against static damage.

7. Disposal:

   • Dispose of the 30ETH06 according to local environmental regulations.
   • Recycle the device if possible.

(For reference only)