Details

---

BUY MPX2050DP https://www.utsource.net/itm/p/12608874.html

Parameter	Symbol	Conditions	Min	Typ	Max	Unit
Supply Voltage	VDD	Operating	4.5	5	5.5	V
Output Signal	VOUT	Differential, 0 psi	-	2.5	-	V
		Differential, 50 psi	-	3.8	-	V
Offset Voltage	VOS		-10	0	10	mV
Sensitivity	S		140	175	210	mV/psi
Nonlinearity	NL		-	±0.5	-	% FS
Hysteresis	HYST		-	±0.2	-	% FS
Temperature Coefficient of Offset	TCOS	-40 to +125°C	-	±0.1	-	mV/°C
Temperature Coefficient of Sensitivity	TCS	-40 to +125°C	-	±0.06	-	%/°C
Operating Temperature	TOPR		-40	-	125	°C
Storage Temperature	TSTG		-40	-	150	°C

Instructions for Use:

1. Power Supply:

   • Ensure the supply voltage is within the specified range (4.5V to 5.5V) to avoid damage to the device.

2. Signal Conditioning:

   • The output signal is differential and varies from approximately 2.5V at 0 psi to 3.8V at 50 psi. Use appropriate signal conditioning circuits if necessary to interface with other components or systems.

3. Calibration:

   • Due to potential variations in offset voltage and sensitivity, calibration may be required for precise measurements. Refer to the manufacturer’s guidelines for calibration procedures.

4. Temperature Effects:

   • Be aware of temperature coefficients affecting both offset voltage and sensitivity. Compensation techniques might be needed for applications requiring high accuracy over a wide temperature range.

5. Mounting Orientation:

   • Ensure the sensor is mounted in a way that minimizes stress on the package, which can affect performance.

6. Environmental Considerations:

   • Operate within the specified temperature ranges to ensure reliable operation. Avoid exposing the device to temperatures exceeding the storage limit.

7. Handling:

   • Handle with care to prevent damage to sensitive components. Follow ESD (Electrostatic Discharge) precautions during installation and handling.

(For reference only)