Details

---

BUY TIC126M. https://www.utsource.net/itm/p/12608880.html

Parameter	Symbol	Min	Typ	Max	Unit	Description
Rated Forward Current	IF	-	10	-	A	Maximum continuous forward current
Peak Forward Current	IFM	-	50	-	A	Non-repetitive peak forward current (8.3 ms)
Forward Voltage Drop	VF	1.0	1.4	1.8	V	At IF = 10A
Reverse Blocking Voltage	VRRM	600	-	-	V	Maximum reverse repetitive peak voltage
Junction Temperature	TJ	-40	-	125	掳C	Operating junction temperature range
Storage Temperature	TSTG	-55	-	150	掳C	Operating storage temperature range
Gate Trigger Current	IGT	10	20	30	mA	Minimum gate trigger current
Holding Current	IH	10	20	30	mA	Minimum holding current
Power Dissipation	PD	-	1000	-	W	Maximum power dissipation

Instructions for Use:

1. Mounting and Handling:

   • Ensure that the device is mounted on a heatsink to dissipate heat effectively.
   • Handle the device with care to avoid mechanical damage.

2. Electrical Connections:

   • Connect the anode (A) and cathode (K) terminals correctly to the load.
   • Apply the gate (G) signal to trigger the thyristor.

3. Forward Current:

   • Do not exceed the rated forward current (IF) of 10A continuously.
   • For short durations, the peak forward current (IFM) can be up to 50A.

4. Reverse Blocking Voltage:

   • Ensure that the reverse voltage applied does not exceed the maximum reverse blocking voltage (VRRM) of 600V.

5. Temperature Considerations:

   • Operate the device within the specified junction temperature (TJ) range of -40掳C to 125掳C.
   • Store the device within the storage temperature (TSTG) range of -55掳C to 150掳C.

6. Gate Triggering:

   • The minimum gate trigger current (IGT) required to turn on the thyristor is between 10mA and 30mA.
   • Once triggered, the thyristor will remain on as long as the holding current (IH) is maintained.

7. Power Dissipation:

   • Ensure that the power dissipation (PD) does not exceed 1000W to prevent overheating and potential damage.

8. Safety Precautions:

   • Always use appropriate safety measures when handling high-voltage and high-current circuits.
   • Follow all relevant electrical and safety standards.

(For reference only)