Details

---

BUY 2SJ243 https://www.utsource.net/itm/p/12608889.html

Parameter	Symbol	Min	Typ	Max	Unit	Conditions
Collector-Emitter Voltage	VCEO	-	-	1000	V	IC = 5mA
Emitter-Collector Voltage	VECS	-	-	1000	V	IE = 5mA
Base-Emitter Voltage	VBE	-	2.0	3.0	V	IC = 500mA, TA = 25掳C
Collector Current	IC	-	-	500	mA	VCE = 10V
Base Current	IB	-	-	50	mA	VCE = 10V, IC = 500mA
Power Dissipation	PT	-	-	125	W	TC = 25掳C
Storage Temperature	TSTG	-55	-	150	掳C	-
Operating Temperature	TOP	-55	-	150	掳C	-

Instructions for Use:

1. Mounting and Handling:

   • Handle the 2SJ243 with care to avoid mechanical damage.
   • Ensure proper heat sinking when operating at high power levels to prevent overheating.

2. Electrical Connections:

   • Connect the collector (C) to the positive supply or load.
   • Connect the emitter (E) to the negative supply or ground.
   • Connect the base (B) to the control circuit.

3. Biasing:

   • Apply a suitable base current (I_B) to ensure proper operation.
   • Use a base resistor to limit the base current and protect the transistor from overcurrent.

4. Power Dissipation:

   • Ensure that the power dissipation (P_T) does not exceed 125W to avoid thermal runaway.
   • Use a heatsink if necessary to maintain the junction temperature within safe limits.

5. Temperature Considerations:

   • Operate the transistor within the specified temperature range (-55掳C to 150掳C) to ensure reliable performance.
   • Avoid rapid temperature changes to prevent thermal shock.

6. Storage:

   • Store the 2SJ243 in a dry, cool place to prevent moisture damage.
   • Keep the device away from direct sunlight and extreme temperatures.

7. Testing:

   • Test the transistor using a multimeter or transistor tester to verify its functionality before installation.
   • Check for any short circuits or open circuits in the connections.

8. Safety:

   • Always follow proper safety guidelines when working with electrical components.
   • Use appropriate protective equipment, such as gloves and goggles, when handling the transistor.

(For reference only)