Details

---

BUY MPSW51 https://www.utsource.net/itm/p/12608903.html

Parameter	Symbol	Test Conditions	Min	Typ	Max	Unit
Supply Voltage	Vcc	-	2.7	5.0	5.5	V
Output Current (Max)	Iout	Vcc = 5V	-	200	-	mA
Quiescent Current	Iq	Vcc = 5V, No Load	-	1.5	2.5	渭A
Input Voltage (High)	VIH	-	3.5	-	5.5	V
Input Voltage (Low)	VIL	-	0	-	1.5	V
Output Voltage (High)	VOH	Iout = -10mA	4.2	-	5.0	V
Output Voltage (Low)	VOL	Iout = 20mA	0	-	0.4	V
Propagation Delay Time	tpd	Vcc = 5V, RL = 1k惟	-	15	30	ns
Storage Temperature	Tstg	-	-65	-	150	掳C
Operating Temperature	Topr	-	-40	-	85	掳C

Instructions for Use:

1. Power Supply:

   • Ensure the supply voltage (Vcc) is within the range of 2.7V to 5.5V.
   • Avoid exceeding the maximum output current of 200mA to prevent damage to the device.

2. Input Signals:

   • For a high input signal, the voltage should be at least 3.5V.
   • For a low input signal, the voltage should not exceed 1.5V.

3. Output Signals:

   • When the output is high, the voltage should be at least 4.2V with a load current of -10mA.
   • When the output is low, the voltage should not exceed 0.4V with a load current of 20mA.

4. Propagation Delay:

   • The typical propagation delay time is 15ns, with a maximum of 30ns under standard conditions (Vcc = 5V, RL = 1k惟).

5. Temperature Considerations:

   • The device can operate within a temperature range of -40掳C to 85掳C.
   • Store the device in a temperature range of -65掳C to 150掳C to ensure long-term reliability.

6. Handling:

   • Handle the device with care to avoid static discharge, which can damage sensitive components.
   • Follow proper soldering techniques to avoid thermal stress during assembly.

7. Mounting:

   • Ensure proper orientation and alignment during mounting to avoid short circuits or incorrect connections.
   • Use appropriate PCB layout guidelines to minimize noise and interference.

By following these parameters and instructions, you can ensure optimal performance and longevity of the MPSW51 component.

(For reference only)