Details

---

BUY D71059C https://www.utsource.net/itm/p/12608908.html

Parameter	Symbol	Min	Typ	Max	Unit	Description
Input Voltage	VIN	4.5	-	40	V	Operating input voltage range
Output Voltage	VOUT	1.2	-	36	V	Adjustable output voltage
Output Current	IOUT	-	-	5	A	Maximum continuous output current
Efficiency	畏	-	90	-	%	Typical efficiency at full load
Quiescent Current	IQ	-	10	-	渭A	Quiescent current
Dropout Voltage	VDROP	-	1.2	-	V	Typical dropout voltage
Load Regulation	-	-	0.5	-	%	Load regulation over specified range
Line Regulation	-	-	0.2	-	%	Line regulation over specified range
Thermal Shutdown	TSD	-	160	-	掳C	Thermal shutdown temperature
Operating Temperature	TOP	-40	-	125	掳C	Operating temperature range
Storage Temperature	TSTORAGE	-65	-	150	掳C	Storage temperature range

Instructions for Using D71059C

1. Input Connection:

   • Connect the input voltage (V_IN) to the input pin of the D71059C.
   • Ensure the input voltage is within the specified range (4.5V to 40V).

2. Output Configuration:

   • Set the desired output voltage (V_OUT) using external resistors if required.
   • The output voltage can be adjusted from 1.2V to 36V.

3. Load Connection:

   • Connect the load to the output pin of the D71059C.
   • Ensure the load current does not exceed the maximum continuous output current (5A).

4. Thermal Management:

   • Monitor the operating temperature to ensure it stays below the thermal shutdown temperature (160掳C).
   • Use appropriate heatsinking if necessary to manage heat dissipation.

5. Protection Circuits:

   • The D71059C includes built-in thermal shutdown and overcurrent protection.
   • These features will automatically protect the device from damage under fault conditions.

6. Storage and Handling:

   • Store the D71059C in a dry, cool environment.
   • Handle with care to avoid static discharge and physical damage.

7. Testing and Troubleshooting:

   • Verify the input and output voltages with a multimeter.
   • Check for any signs of overheating or unusual behavior.
   • Refer to the datasheet for detailed troubleshooting steps and additional information.

(For reference only)