Details

---

BUY HM6116P-2 https://www.utsource.net/itm/p/12608909.html

Parameter	Description	Value
Part Number	Full Part Number	HM6116P-2
Type	Device Type	Static RAM (SRAM)
Organization	Memory Organization	16K x 8 bits
Supply Voltage	Operating Voltage Range	4.5V to 5.5V
Current	Active Current (Typical)	100 渭A at 5V, 25掳C
Standby Current	Standby Current (Typical)	5 渭A at 5V, 25掳C
Access Time	Access Time (Typical)	150 ns
Data Retention	Data Retention Time	10 years at 85掳C
Operating Temperature	Operating Temperature Range	-40掳C to +85掳C
Storage Temperature	Storage Temperature Range	-65掳C to +150掳C
Package	Package Type	28-pin DIP (Dual Inline Package)
Pin Configuration	Pin Count	28 pins
Pin 1	Function	Vcc (Power Supply)
Pin 2	Function	A0 (Address Line 0)
Pin 3	Function	A1 (Address Line 1)
Pin 4	Function	A2 (Address Line 2)
Pin 5	Function	A3 (Address Line 3)
Pin 6	Function	A4 (Address Line 4)
Pin 7	Function	A5 (Address Line 5)
Pin 8	Function	A6 (Address Line 6)
Pin 9	Function	A7 (Address Line 7)
Pin 10	Function	A8 (Address Line 8)
Pin 11	Function	A9 (Address Line 9)
Pin 12	Function	A10 (Address Line 10)
Pin 13	Function	A11 (Address Line 11)
Pin 14	Function	A12 (Address Line 12)
Pin 15	Function	GND (Ground)
Pin 16	Function	D0 (Data Line 0)
Pin 17	Function	D1 (Data Line 1)
Pin 18	Function	D2 (Data Line 2)
Pin 19	Function	D3 (Data Line 3)
Pin 20	Function	D4 (Data Line 4)
Pin 21	Function	D5 (Data Line 5)
Pin 22	Function	D6 (Data Line 6)
Pin 23	Function	D7 (Data Line 7)
Pin 24	Function	OE (Output Enable)
Pin 25	Function	WE (Write Enable)
Pin 26	Function	CE (Chip Enable)
Pin 27	Function	NC (No Connect)
Pin 28	Function	Vcc (Power Supply)

Instructions for Use:

1. Power Supply: Connect Vcc (pin 1 and pin 28) to +5V and GND (pin 15) to ground.
2. Address Lines: Connect the address lines (pins 2-14) to the appropriate address bus.
3. Data Lines: Connect the data lines (pins 16-23) to the data bus.
4. Control Signals:
   • OE (Output Enable): Active low. When low, data is read from the memory.
   • WE (Write Enable): Active low. When low, data is written to the memory.
   • CE (Chip Enable): Active low. When low, the chip is enabled.
5. Timing:
   • Ensure that the access time (150 ns typical) is respected to avoid data corruption.
   • The setup and hold times for address and data lines should be within the specified limits.
6. Temperature Considerations:
   • Operate within the temperature range of -40掳C to +85掳C for reliable performance.
   • Store the device between -65掳C and +150掳C.
7. Handling:
   • Handle with care to avoid static damage.
   • Follow standard ESD (Electrostatic Discharge) precautions.

Additional Notes:

• Data Retention: The device retains data for up to 10 years at 85掳C.
• Standby Mode: To minimize power consumption, set CE high when the device is not in use.

(For reference only)