Details

---

BUY DS14C88N/NOPB https://www.utsource.net/itm/p/12608916.html

Parameter	Description	Min	Typ	Max	Unit
Supply Voltage (VCC)	Operating supply voltage	2.5	-	5.5	V
Standby Current	Supply current in standby mode	-	1	-	渭A
Active Current	Supply current in active mode	-	300	-	渭A
Output Drive Capability	Output high-level voltage	-	4.5	VCC-0.4	V
Output Drive Capability	Output low-level voltage	GND+0.4	-	0.9	V
Input Leakage Current	Leakage current at input pins	-1	-	1	渭A
Operating Temperature Range	Ambient temperature for operation	-40	-	85	掳C

Instructions for DS14C88N/NOPB

1. Power Supply Connection:

   • Connect the VCC pin to a power supply within the range of 2.5V to 5.5V.
   • Ensure that the ground (GND) pin is connected to the system ground.

2. Signal Handling:

   • Inputs should be driven by signals that stay within the valid logic levels relative to VCC and GND.
   • Outputs can drive loads up to the specified output drive capability limits.

3. Standby Mode:

   • To minimize power consumption, ensure the device enters standby mode when not actively processing data. This can significantly reduce the supply current.

4. Temperature Considerations:

   • Operate the device within the specified temperature range (-40掳C to 85掳C) to ensure reliable performance and prevent damage.

5. Handling Electrostatic Discharge (ESD):

   • Handle the device with care to avoid ESD damage. Use proper grounding and ESD protection equipment when handling or testing.

6. Mounting and Layout:

   • Follow recommended PCB layout guidelines for optimal electrical performance and thermal management. Ensure adequate spacing and appropriate heat dissipation measures if necessary.

7. Testing and Validation:

   • Before deploying in a final application, thoroughly test the device under all expected operating conditions to ensure it meets the required specifications.

(For reference only)