Details

---

BUY DS1010-200 https://www.utsource.net/itm/p/12608918.html

Parameter	Description
Part Number	DS1010-200
Type	Digital Storage Oscilloscope
Bandwidth	100 MHz
Sample Rate	2 GSa/s (Giga Samples per second)
Memory Depth	20 Mpts (Mega Points)
Channels	2 analog channels
Vertical Resolution	8-bit
Horizontal Scale	2 ns to 500 s/div
Vertical Scale	1 mV to 10 V/div
Input Impedance	1 M惟 卤3% in parallel with 17 pF 卤3 pF
Trigger Types	Edge, Pulse, Video, Pattern, Delay, Width, Transition, Timeout, State
Interface	USB 2.0, LAN
Power Supply	100-240 VAC, 47-63 Hz
Operating Temperature	0掳C to 40掳C
Dimensions	429 mm x 145 mm x 210 mm (W x H x D)
Weight	6.5 kg

Instructions

1. Powering On:

   • Connect the oscilloscope to a power source using the provided power cable.
   • Press the power button on the front panel to turn on the device.

2. Connecting Probes:

   • Insert the probe connectors into the appropriate input channels on the front panel.
   • Adjust the probe settings via the menu if necessary.

3. Setting Up Channels:

   • Use the channel buttons to enable or disable specific channels.
   • Adjust the vertical and horizontal scales using the knobs or touchscreen interface.

4. Triggering:

   • Select the desired trigger type from the menu.
   • Adjust the trigger level and source as needed for stable waveform display.

5. Saving Data:

   • Use the USB port to connect a storage device for saving waveforms and setup configurations.
   • Navigate through the menu to save data to the connected device.

6. Connecting to PC:

   • Use the USB or LAN interface to connect the oscilloscope to a computer.
   • Install the provided software for remote control and data analysis.

7. Maintenance:

   • Ensure the operating environment is within the specified temperature range.
   • Clean the exterior with a soft, dry cloth; avoid using abrasive materials.

8. Troubleshooting:

   • Refer to the user manual for troubleshooting common issues.
   • Contact technical support if problems persist.

(For reference only)