Details

---

BUY TL0821 https://www.utsource.net/itm/p/12608919.html

Parameter	Min	Typ	Max	Unit	Description
Supply Voltage	卤4	-	卤18	V	Operating supply voltage range
Input Offset Voltage	-	3	-	mV	Maximum input offset voltage at 25掳C
Input Bias Current	-	60	-	nA	Typical input bias current at 25掳C
Slew Rate	-	13	-	V/渭s	Rate of change of output voltage per unit time
Bandwidth	-	3.5	-	MHz	Frequency at which the open-loop gain falls to unity
Output Swing	-	-	卤13	V	Peak-to-peak output swing with respect to each supply rail
Power Consumption	-	-	-	mW	Power consumption per operational amplifier

Instructions for Use:

1. Supply Voltage: Ensure that the supply voltage is within the specified range (卤4V to 卤18V). Exceeding these limits can damage the device.
2. Input Signals: Keep input signals within the common-mode input voltage range to avoid distortion or damage.
3. Power-On Sequence: Apply power carefully, ensuring both positive and negative supplies are stable before applying any input signals.
4. Decoupling Capacitors: Place decoupling capacitors close to the power supply pins to minimize noise and transient effects.
5. Output Load: Ensure the load connected to the output does not exceed the maximum output current capability of the device.
6. Operating Temperature: Operate the device within its specified temperature range to ensure reliable performance.
7. Handling Precautions: Handle the device with care to prevent electrostatic discharge (ESD) damage.

Note: The TL0821 is a JFET-input operational amplifier known for low input bias current and high slew rate, suitable for a variety of analog signal processing applications.

(For reference only)