Details

---

BUY BUK100-50DL https://www.utsource.net/itm/p/12608925.html

Parameter	Symbol	Min	Typical	Max	Unit	Conditions
Collector-Emitter Voltage	VCEO	-	-	500	V	IC = 0, TJ = 25°C
Emitter-Collector Voltage	VEBO	-	-	5	V	IE = 0, TJ = 25°C
Base-Emitter Voltage	VBE	-	-	2	V	IC = 0, TJ = 25°C
Continuous Collector Current	IC	-	100	-	A	TC = 25°C
Peak Collector Current	IC(peak)	-	200	-	A	Pulse width ≤ 10 ms, Duty cycle ≤ 2%
Power Dissipation	PTOT	-	-	175	W	TC = 25°C
Junction Temperature	TJ	-	-	150	°C	-
Storage Temperature	TSTG	-40	-	150	°C	-

Instructions for Use:

1. Mounting and Handling:

   • Ensure proper heat sinking to manage the power dissipation.
   • Handle the device with care to avoid mechanical damage.

2. Electrical Connections:

   • Connect the collector (C) to the high-voltage side of the circuit.
   • Connect the emitter (E) to the low-voltage side or ground.
   • Connect the base (B) to the control signal source.

3. Thermal Management:

   • Ensure adequate cooling to keep the junction temperature below 150°C.
   • Use a thermal compound between the device and the heatsink for better thermal conductivity.

4. Overvoltage Protection:

   • Consider using overvoltage protection devices such as Zener diodes to protect against transient voltages.

5. Current Limiting:

   • Use a base resistor to limit the base current and prevent damage to the transistor.

6. Storage:

   • Store the device in a dry, cool place to avoid moisture damage.
   • Keep away from direct sunlight and extreme temperatures.

7. Testing:

   • Test the device under controlled conditions to ensure it meets the specified parameters.
   • Use a multimeter or other appropriate test equipment to verify the functionality.

8. Safety Precautions:

   • Always disconnect the power supply before making any connections or adjustments.
   • Follow all safety guidelines to prevent electrical shock and damage to the device.

(For reference only)