Details

---

BUY HD46508PA https://www.utsource.net/itm/p/12608938.html

Parameter	Symbol	Min	Typ	Max	Unit
Supply Voltage	Vcc	4.5	5.0	5.5	V
Operating Temperature	Topr	-20	-	70	掳C
Storage Temperature	Tstg	-40	-	85	掳C
Input Voltage	Vin	0	-	Vcc	V
Output Current	Iout	-	10	20	mA
Power Consumption	Pd	-	200	300	mW
Input Leakage Current	Iin	-	1	5	渭A
Output Leakage Current	Ileak	-	1	5	渭A
Propagation Delay Time	tpd	20	35	50	ns
Rise Time	tr	5	10	15	ns
Fall Time	tf	5	10	15	ns

Instructions for Use

1. Power Supply:

   • Ensure the supply voltage (Vcc) is within the range of 4.5V to 5.5V.
   • Connect the power supply to the Vcc pin and ground to the GND pin.

2. Temperature Considerations:

   • The operating temperature range is from -20掳C to 70掳C.
   • The storage temperature range is from -40掳C to 85掳C.

3. Input Signals:

   • Input voltages (Vin) should be between 0V and Vcc.
   • Ensure input signals do not exceed Vcc to avoid damage.

4. Output Load:

   • The maximum output current (Iout) is 20mA. Ensure the load does not exceed this limit.
   • The typical output current is 10mA.

5. Power Consumption:

   • The typical power consumption is 200mW, with a maximum of 300mW.

6. Leakage Current:

   • Input leakage current (Iin) and output leakage current (Ileak) are both typically 1渭A and can be up to 5渭A.

7. Timing Parameters:

   • Propagation delay time (tpd) is typically 35ns, with a minimum of 20ns and a maximum of 50ns.
   • Rise time (tr) and fall time (tf) are both typically 10ns, with a minimum of 5ns and a maximum of 15ns.

8. Handling and Storage:

   • Store the device in a dry, cool place within the specified storage temperature range.
   • Handle the device with care to avoid static discharge, which can damage the internal components.

9. Mounting:

   • Ensure proper soldering techniques are used to avoid overheating the device during assembly.
   • Follow the recommended PCB layout guidelines for optimal performance.

10. Testing:

    • Before applying power, verify all connections and ensure there are no short circuits.
    • Use a multimeter to check for continuity and correct voltages at the pins.

11. Troubleshooting:

    • If the device does not function as expected, check the power supply, input signals, and load connections.
    • Refer to the datasheet for additional troubleshooting tips and specifications.

(For reference only)