Details

---

BUY M50D060S. https://www.utsource.net/itm/p/12608939.html

Parameter	Symbol	Min	Typical	Max	Unit	Notes
Input Voltage	VIN	4.5	-	5.5	V
Output Voltage	VOUT	3.3	-	3.3	V	Fixed
Output Current	IOUT	-	600	-	mA	Continuous
Quiescent Current	IQ	-	1.5	-	渭A	Shutdown mode
Efficiency	畏	-	90	-	%	At nominal conditions
Operating Temp.	TOPR	-40	-	85	掳C	Storage: -40 to 125掳C
Package	-	-	SOT-23	-	-

Instructions for Using M50D060S

1. Power Supply Connection:

   • Connect the input voltage (VIN) to the power supply within the specified range of 4.5V to 5.5V.
   • Ensure the ground (GND) is properly connected to the common ground of the system.

2. Output Connection:

   • The output voltage (VOUT) is fixed at 3.3V. Connect the load to the VOUT pin.
   • Ensure the load does not exceed the maximum continuous output current of 600mA.

3. Quiescent Current:

   • The quiescent current is very low, typically 1.5渭A in shutdown mode, making it suitable for battery-powered applications.

4. Efficiency:

   • The device operates with high efficiency, typically around 90%, under nominal conditions.

5. Operating Temperature:

   • The operating temperature range is from -40掳C to 85掳C. Store the device between -40掳C and 125掳C.

6. Package:

   • The M50D060S is available in a SOT-23 package, which is compact and easy to solder.

7. Handling:

   • Handle the device with care to avoid static damage. Use proper ESD protection when handling the component.

8. Mounting:

   • Ensure good thermal management by providing adequate heat sinking if the device is expected to operate near its maximum output current.

9. Testing:

   • Before final assembly, test the device in a controlled environment to ensure it meets the required specifications.

10. Storage:

    • Store the device in a dry, cool place to prevent moisture damage. Follow the storage temperature guidelines provided.

(For reference only)