Details

---

BUY AMC1203 https://www.utsource.net/itm/p/12608941.html

Parameter	Symbol	Min	Typical	Max	Unit	Description
Supply Voltage	VDD	2.7	-	5.5	V	Operating supply voltage
Quiescent Current	IDD	-	260	-	渭A	Supply current (VDD = 5V)
Common-Mode Input Voltage	VINCM	-40	-	80	V	Range over which the input operates
Differential Input Voltage	VINDIFF	-0.1	-	0.1	V	Maximum differential input voltage
Output Voltage (High)	VOH	2.4	-	VDD-0.1	V	Output high level (IOL = 1mA)
Output Voltage (Low)	VOL	0	-	0.4	V	Output low level (IOH = -1mA)
Propagation Delay	tPD	-	115	-	ns	Time delay from input to output
Power Dissipation	PD	-	-	100	mW	Maximum power dissipation
Operating Temperature	Toper	-40	-	125	掳C	Temperature range for operation
Storage Temperature	Tstg	-65	-	150	掳C	Temperature range for storage

Instructions for Use:

1. Power Supply:

   • Connect the VDD pin to a stable power supply between 2.7V and 5.5V.
   • Connect the GND pin to the system ground.

2. Input Connection:

   • Connect the IN+ and IN- pins to the differential signal source. Ensure the common-mode voltage (VINCM) is within the specified range (-40V to 80V).
   • The differential input voltage (VINDIFF) should not exceed 卤0.1V.

3. Output Configuration:

   • The output (OUT) is a single-ended digital signal. Connect it to the input of the downstream logic or microcontroller.
   • Ensure the load on the output does not exceed the specified current limits.

4. Propagation Delay:

   • The propagation delay (tPD) is typically 115ns. Account for this delay in your timing calculations.

5. Thermal Management:

   • Ensure adequate heat dissipation if operating at high power levels or in high ambient temperatures.
   • Do not exceed the maximum power dissipation (PD) of 100mW.

6. Operating and Storage Temperature:

   • Operate the device within the temperature range of -40掳C to 125掳C.
   • Store the device within the temperature range of -65掳C to 150掳C.

7. Handling Precautions:

   • Handle the device with care to avoid static damage. Use proper ESD protection.
   • Avoid mechanical stress on the pins and package.

By following these instructions, you can ensure reliable and efficient operation of the AMC1203.

(For reference only)