Details

---

BUY IRFT002 https://www.utsource.net/itm/p/12608948.html

Parameter	Symbol	Min	Typ	Max	Unit	Description
Drain-Source Voltage	VDS	-	-	60	V	Maximum drain-source voltage
Gate-Source Voltage	VGS	-20	-	20	V	Maximum gate-source voltage
Continuous Drain Current	ID	-	14	-	A	Continuous drain current at TC = 25掳C
Pulse Drain Current	ID(peak)	-	45	-	A	Peak pulse drain current (tp = 10 渭s, IG = 2 A)
Power Dissipation	Ptot	-	-	120	W	Total power dissipation at TC = 25掳C
Junction Temperature	TJ	-	-	175	掳C	Maximum junction temperature
Storage Temperature	Tstg	-65	-	150	掳C	Operating storage temperature range

Instructions for Use

1. Handling Precautions:

   • Handle the IRFT002 with care to avoid damage to the leads and body.
   • Use proper ESD (Electrostatic Discharge) protection to prevent damage from static electricity.

2. Mounting:

   • Ensure that the mounting surface is clean and flat to ensure good thermal contact.
   • Apply a suitable thermal compound between the device and the heatsink to improve heat dissipation.

3. Biasing:

   • Apply the gate-source voltage (V_GS) carefully to avoid exceeding the maximum ratings.
   • For optimal performance, keep V_GS within the recommended operating range.

4. Current Limiting:

   • Use appropriate current limiting techniques to prevent the drain current (I_D) from exceeding the continuous or peak ratings.
   • Consider using external resistors or current-limiting circuits to protect the device.

5. Thermal Management:

   • Ensure adequate cooling to keep the junction temperature (T_J) below the maximum rating.
   • Monitor the temperature during operation and adjust the cooling as necessary.

6. Pulse Operation:

   • When operating in pulse mode, ensure that the pulse duration and frequency do not exceed the specified limits to avoid overheating.

7. Storage:

   • Store the IRFT002 in a dry, cool place away from direct sunlight and extreme temperatures.
   • Follow the recommended storage temperature range to prevent damage.

8. Testing:

   • Use a suitable testing setup to verify the functionality of the IRFT002 before integrating it into the final application.
   • Refer to the datasheet for specific test conditions and procedures.

(For reference only)