Details

---

BUY TIP30B. https://www.utsource.net/itm/p/12608959.html

Parameter	Symbol	Min	Typ	Max	Unit	Notes
Collector-Emitter Voltage	VCEO	-	-	60	V
Emitter-Collector Voltage	VEBO	-	-	5	V
Base-Emitter Voltage (ON)	VBE(on)	1.8	2.5	3.2	V	@ IC = 1A, IB = 100mA
Collector Current	IC	-	-	10	A	Continuous
Power Dissipation	PT	-	-	40	W	@ TA = 25掳C
Storage Temperature Range	TSTG	-65	-	150	掳C
Operating Junction Temperature	TJ	-65	-	150	掳C

Instructions for Use:

1. Mounting and Handling:

   • Ensure proper heat sinking to manage power dissipation, especially when operating at high currents.
   • Handle the TIP30B with care to avoid mechanical damage or static discharge.

2. Biasing:

   • Apply sufficient base current to ensure the transistor is fully saturated when in the ON state.
   • Use a base resistor to limit the base current and protect the transistor from overcurrent.

3. Thermal Management:

   • Monitor the junction temperature to ensure it does not exceed the maximum rating.
   • Use thermal paste between the transistor and heat sink to improve thermal conductivity.

4. Electrical Connections:

   • Connect the collector to the load and the positive supply.
   • Connect the emitter to the ground or negative supply.
   • Connect the base to the control circuit through a suitable resistor.

5. Storage:

   • Store the TIP30B in a dry, cool place to prevent moisture damage.
   • Keep the components away from direct sunlight and sources of heat.

6. Testing:

   • Test the transistor using a multimeter or a dedicated transistor tester to ensure it is functioning correctly before installation.
   • Verify the voltage and current ratings are within the specified limits during operation.

(For reference only)