Details

---

BUY BTB08-800TW https://www.utsource.net/itm/p/12608964.html

Parameter	Value
Part Number	BTB08-800TW
Type	Triac
Mounting Type	Through-Hole
Package / Case	TO-220-3
Current - On-State (I_T(RMS))	8A (RMS)
Voltage - Off-State (V_DRM)	800V (RMS)
Power Dissipation (P_T)	110W
Maximum Junction Temperature (T_J(max))	125掳C
Trigger Current (I_GT)	5mA (max)
Holding Current (I_H)	10mA (min)
Dissipation Factor (Q) at I_T = 8A	2.5 W/A
Thermal Resistance, Junction to Case (R胃JC)	2.5掳C/W
Storage Temperature Range (T_STG)	-65掳C to 150掳C

Instructions for Use

1. Mounting:

   • Ensure the device is mounted on a heatsink if continuous operation at high currents is expected.
   • Use a thermal compound between the device and the heatsink to improve heat dissipation.

2. Triggering:

   • Apply a trigger current greater than the specified minimum (I_GT) to turn the triac on.
   • Ensure the gate current does not exceed the maximum value to avoid damaging the device.

3. Operation:

   • Keep the junction temperature within the specified range to ensure reliable operation.
   • Monitor the power dissipation to avoid exceeding the maximum rating.

4. Handling:

   • Handle the device with care to avoid mechanical damage.
   • Follow ESD (Electrostatic Discharge) precautions to prevent damage from static electricity.

5. Testing:

   • Use appropriate test equipment and methods to verify the functionality of the triac.
   • Test the device under conditions that simulate its intended application.

6. Storage:

   • Store the device in a dry, cool place away from direct sunlight and corrosive environments.
   • Observe the storage temperature range to prevent degradation of the device.

(For reference only)