Details

---

BUY TK72E12N1,S1X https://www.utsource.net/itm/p/12608971.html

Parameter	Description	Value
Part Number	Full part number	TK72E12N1,S1X
Type	Type of component	MOSFET
Vds (V)	Drain-Source Voltage	700V
Id (A)	Continuous Drain Current	12A
Rds(on) (惟)	On-State Resistance at specified conditions	0.65惟 (max)
Ptot (W)	Total Power Dissipation	125W
Package	Package type	TO-247AC
Operating Temp.	Operating Temperature Range	-55掳C to 150掳C
Mounting Type	Method of mounting	Through Hole

Instructions for Use:

1. Handling Precautions:

   • Handle the device with care to avoid damage to the pins and body.
   • Use appropriate ESD protection measures to prevent static damage.

2. Installation:

   • Ensure that the mounting surface is clean and flat.
   • Apply thermal paste between the heatsink and the device for better heat dissipation if necessary.
   • Secure the device using recommended torque values to avoid mechanical stress.

3. Electrical Connections:

   • Connect the drain, source, and gate terminals as per the circuit design.
   • Verify all connections are secure and correct before applying power.

4. Thermal Management:

   • Ensure adequate cooling, especially if operating near maximum power dissipation.
   • Monitor temperature during operation to ensure it remains within specified limits.

5. Storage:

   • Store in a dry, cool place away from direct sunlight.
   • Keep in original packaging until ready for use to protect against ESD.

(For reference only)