Details

---

BUY MAC224A8 https://www.utsource.net/itm/p/12608979.html

Parameter	Description	Value
Part Number	Full part number	MAC224A8
Type	Type of device	MOSFET
Technology	Technology used	Silicon
Package	Package type	TO-220
VDS (Max)	Drain-to-Source Voltage	200V
VGS (Max)	Gate-to-Source Voltage	卤20V
ID (Max)	Continuous Drain Current	8A
RDS(on) (Max)	On-State Resistance at VGS = 10V	0.075惟
Power Dissipation (Max)	Maximum Power Dissipation at Tc = 25掳C	125W
Operating Temperature Range	Junction Temperature Range	-55掳C to 150掳C
Storage Temperature Range	Storage Temperature Range	-65掳C to 150掳C
Gate Charge (Qg)	Total Gate Charge at VGS = 10V	90nC
Input Capacitance (Ciss)	Input Capacitance at VDS = 15V, f = 1MHz	1300pF
Output Capacitance (Coss)	Output Capacitance at VDS = 15V, f = 1MHz	280pF
Reverse Transfer Capacitance (Crss)	Reverse Transfer Capacitance at VDS = 15V, f = 1MHz	220pF
Thermal Resistance (R胃JC)	Junction-to-Case Thermal Resistance	1.5掳C/W
Thermal Resistance (R胃JA)	Junction-to-Ambient Thermal Resistance	62.5掳C/W

Instructions for Use:

1. Handling and Storage:

   • Store in a dry, cool place away from direct sunlight.
   • Handle with care to avoid damage to the leads and package.

2. Mounting:

   • Ensure proper heat sinking to manage thermal dissipation.
   • Use a thermal interface material (TIM) between the device and the heatsink for better heat transfer.

3. Electrical Connections:

   • Connect the drain (D), gate (G), and source (S) terminals correctly.
   • Use appropriate wire gauges to handle the current ratings.

4. Biasing and Operation:

   • Apply the correct gate-to-source voltage (VGS) to turn the MOSFET on or off.
   • Ensure the drain-to-source voltage (VDS) does not exceed the maximum rating.
   • Monitor the power dissipation to avoid overheating.

5. Testing:

   • Test the device in a controlled environment to ensure it meets the specified parameters.
   • Use a multimeter or oscilloscope to verify the electrical characteristics.

6. Safety Precautions:

   • Always use protective equipment when handling high-voltage circuits.
   • Follow all relevant safety guidelines and regulations.

7. Troubleshooting:

   • If the device fails, check for overvoltage, overcurrent, or overheating conditions.
   • Replace the device if it is damaged or shows signs of failure.

(For reference only)