Details

---

BUY B650TG https://www.utsource.net/itm/p/12608992.html

Parameter	Description
Part Number	B650TG
Type	Bipolar Transistor
Polarity	NPN
Collector-Emitter Voltage (Vce)	80 V
Emitter-Base Voltage (Veb)	6 V
Collector Current (Ic)	15 A
Power Dissipation (Ptot)	150 W
Base Current (Ib)	15 A (max)
Transition Frequency (fT)	1 MHz
Storage Temperature Range	-55掳C to +150掳C
Operating Temperature Range	-55掳C to +150掳C
Package Type	TO-220
Mounting Type	Through-Hole

Instructions for Use

1. Handling Precautions:

   • Avoid exposing the B650TG to excessive heat, moisture, or mechanical stress.
   • Use proper anti-static precautions when handling the transistor.

2. Mounting:

   • Ensure the mounting surface is clean and flat.
   • Apply a thin layer of thermal compound between the transistor and the heatsink to improve thermal conductivity.
   • Tighten the mounting screws to the recommended torque to avoid damage to the transistor.

3. Electrical Connections:

   • Connect the collector (C), base (B), and emitter (E) terminals correctly.
   • Use insulated wires to prevent short circuits.
   • Ensure that the voltage and current ratings are not exceeded.

4. Thermal Management:

   • The B650TG can dissipate up to 150 W of power. Use an appropriate heatsink to keep the junction temperature within safe limits.
   • Monitor the temperature of the heatsink and ensure it does not exceed the maximum operating temperature.

5. Testing:

   • Before installing the transistor in a circuit, test it with a multimeter to ensure it is functioning correctly.
   • Check for continuity between the base and emitter, and between the collector and emitter.

6. Storage:

   • Store the B650TG in a dry, cool place away from direct sunlight.
   • Keep the components in their original packaging until ready for use.

7. Disposal:

   • Dispose of the B650TG according to local regulations for electronic waste.

(For reference only)