Details

---

BUY G5Q-1A4-DC12V https://www.utsource.net/itm/p/12608993.html

Parameter	Value
Model Number	G5Q-1A4-DC12V
Type	Relay
Coil Voltage	12V DC
Coil Current	37mA (max)
Contact Form	SPDT (Single Pole Double Throw)
Contact Rating	10A at 250V AC / 30V DC
Insulation Resistance	100M惟 (min)
Dielectric Strength	1000V AC for 1 minute
Mechanical Life	10 million operations
Electrical Life	100,000 operations (resistive load)
Operating Temperature	-40掳C to +85掳C
Storage Temperature	-40掳C to +85掳C
Humidity	95% RH (non-condensing)
Weight	15g
Dimensions	17.5mm x 12.5mm x 12.5mm

Instructions for Use:

1. Installation:

   • Ensure that the relay is installed in a location where it will not be exposed to excessive heat, moisture, or mechanical stress.
   • Mount the relay on a flat, stable surface using the provided mounting holes.

2. Wiring:

   • Connect the coil terminals to the 12V DC power supply.
   • Connect the load to the normally open (NO) and common (COM) terminals for switching when the relay is energized.
   • Connect the load to the normally closed (NC) and common (COM) terminals for switching when the relay is de-energized.

3. Operation:

   • When the coil is energized, the normally open (NO) contact closes, and the normally closed (NC) contact opens.
   • When the coil is de-energized, the normally open (NO) contact opens, and the normally closed (NC) contact closes.

4. Maintenance:

   • Regularly inspect the relay for signs of wear or damage.
   • Ensure that the contacts are clean and free from corrosion.
   • Do not exceed the rated voltage and current specifications to avoid damage to the relay.

5. Safety Precautions:

   • Always disconnect the power supply before installing or servicing the relay.
   • Do not touch the relay terminals while the power is on to avoid electric shock.
   • Use appropriate fuses or circuit breakers to protect the relay from overcurrent conditions.

(For reference only)