Details

---

BUY FDC37C651QFP https://www.utsource.net/itm/p/12608995.html

Parameter	Symbol	Min	Typical	Max	Unit
Operating Voltage	Vcc	4.75	5.0	5.25	V
Operating Temperature	Ta	-40	-	85	掳C
Storage Temperature	Tstg	-55	-	150	掳C
Supply Current (Active)	Icc	-	100	150	渭A
Supply Current (Standby)	Iccs	-	10	20	渭A
Output High Level	VOH	4.0	-	Vcc-0.4	V
Output Low Level	VOL	0	-	0.4	V
Input High Level	VIH	2.0	-	Vcc	V
Input Low Level	VIL	0	-	0.8	V
Propagation Delay Time	tpd	20	-	50	ns
Power-On Reset Time	tPOR	100	-	500	ms

Instructions for FDC37C651QFP

1. Power Supply:

   • Ensure the supply voltage (Vcc) is within the specified range of 4.75V to 5.25V.
   • Use a stable power source to avoid voltage fluctuations that could affect the operation of the device.

2. Temperature Considerations:

   • Operate the device within the temperature range of -40掳C to 85掳C.
   • Store the device in an environment with temperatures between -55掳C and 150掳C.

3. Current Consumption:

   • The active supply current (Icc) typically ranges from 100渭A to 150渭A.
   • The standby supply current (Iccs) typically ranges from 10渭A to 20渭A.

4. Output Levels:

   • Ensure the output high level (VOH) is at least 4.0V and no more than Vcc - 0.4V.
   • Ensure the output low level (VOL) is between 0V and 0.4V.

5. Input Levels:

   • The input high level (VIH) should be at least 2.0V and can go up to Vcc.
   • The input low level (VIL) should be between 0V and 0.8V.

6. Timing Parameters:

   • The propagation delay time (tpd) should be between 20ns and 50ns.
   • The power-on reset time (tPOR) should be between 100ms and 500ms.

7. Handling and Storage:

   • Handle the device with care to avoid static damage.
   • Store the device in a dry, cool place to prevent moisture damage.

8. Mounting and Soldering:

   • Follow the recommended soldering profile to ensure proper mounting on the PCB.
   • Avoid excessive heat during soldering to prevent damage to the device.

9. Testing:

   • Perform initial testing under controlled conditions to verify the functionality of the device.
   • Regularly check the operating parameters to ensure they remain within the specified limits.

10. Application Notes:

    • Refer to the datasheet and application notes for specific usage guidelines and circuit design recommendations.

(For reference only)