Details

---

BUY EX1-N6 https://www.utsource.net/itm/p/12609034.html

Parameter	Description	Value
Part Number	Unique identifier for the component	EX1-N6
Type	Component type	Electronic Module
Operating Voltage	Range of input voltage	3.3V to 5V
Operating Current	Maximum current consumption	20mA
Operating Temperature	Temperature range for operation	-40掳C to +85掳C
Storage Temperature	Temperature range for storage	-55掳C to +125掳C
Input Signal	Type of input signal	Digital (TTL)
Output Signal	Type of output signal	Analog (0-5V)
Response Time	Time to reach stable output	< 1ms
Dimensions	Physical size (L x W x H)	20mm x 15mm x 5mm
Weight	Weight of the component	5g
Mounting	Method of mounting	Surface Mount

Instructions:

1. Power Supply:

   • Connect the power supply to the VCC and GND pins.
   • Ensure the operating voltage is within the specified range (3.3V to 5V).

2. Input Connection:

   • Connect the digital input signal to the IN pin.
   • The input signal should be a TTL-compatible digital signal.

3. Output Connection:

   • Connect the output signal to the OUT pin.
   • The output signal is an analog voltage ranging from 0V to 5V.

4. Operating Environment:

   • Ensure the operating temperature is within the range of -40掳C to +85掳C.
   • Store the module in an environment with temperatures between -55掳C and +125掳C.

5. Mounting:

   • Use surface mount techniques to attach the module to the PCB.
   • Follow standard soldering practices to ensure a reliable connection.

6. Testing:

   • After installation, apply a known input signal and verify the output voltage using a multimeter.
   • Check for any short circuits or incorrect connections.

7. Handling:

   • Handle the module with care to avoid physical damage.
   • Use anti-static precautions to prevent damage from static electricity.

8. Troubleshooting:

   • If the output does not respond as expected, check the power supply and input connections.
   • Verify that the operating conditions (voltage, temperature) are within the specified limits.

(For reference only)