Details

---

BUY HCPL0870 https://www.utsource.net/itm/p/12609049.html

Parameter	Symbol	Conditions	Min	Typ	Max	Unit
Input Current	IF(ON)	VDD = 5V	1.0	-	2.0	mA
Input Current	IF(OFF)	VDD = 5V	-	-	0.1	mA
Output High Voltage	VOH	IO = 4mA, VDD = 5V	3.5	-	5.0	V
Output Low Voltage	VOL	IO = -4mA, VDD = 5V	0.0	-	0.4	V
Propagation Delay Time (Low to High)	tPLH	VDD = 5V, IF = 1.6mA, IO = 4mA	-	1.5	-	渭s
Propagation Delay Time (High to Low)	tPHL	VDD = 5V, IF = 1.6mA, IO = -4mA	-	1.5	-	渭s
Storage Temperature	Tstg	-	-65	-	150	掳C

Instructions for HCPL0870

1. Power Supply: Ensure the power supply voltage (VDD) is within the specified range of 4.5V to 5.5V for optimal performance.
2. Input Current: The input current should be between 1.0mA and 2.0mA for a logic high state, and less than 0.1mA for a logic low state.
3. Output Levels: When the output is high, it can reach up to the supply voltage level (VOH). For a low output, the voltage should not exceed 0.4V (VOL).
4. Propagation Delay: The device has typical propagation delays of 1.5渭s for both low-to-high and high-to-low transitions.
5. Temperature Range: Store and operate the device within the temperature range of -65掳C to 150掳C.
6. Handling Precautions: Handle with care to avoid electrostatic discharge (ESD) damage. Use proper ESD protection measures during handling and installation.
7. Mounting: Ensure correct orientation and secure mounting on the PCB to prevent mechanical stress which could affect performance or cause damage.

(For reference only)