Details

---

BUY CA324E https://www.utsource.net/itm/p/12609054.html

Parameter	Symbol	Conditions	Min	Typ	Max	Unit
Supply Voltage	Vcc	Operating	4.5	10	18	V
Quiescent Current	IQ	Vcc = 10V, No Load	-	2.5	-	mA
Output Current	Iout	Continuous	-	100	-	mA
Output Voltage Swing	Vos	Load = 1k惟 to Ground	1.2	-	1.8	V
Slew Rate	SR	-	-	0.5	-	V/渭s
Power Dissipation	Pd	TA = 25掳C	-	-	650	mW
Operating Temperature	Temp	Storage and Operation	-40	-	85	掳C

Instructions for Use:

1. Supply Voltage (Vcc):

   • Ensure the supply voltage is within the range of 4.5V to 18V.
   • Avoid exceeding the maximum voltage to prevent damage to the device.

2. Quiescent Current (IQ):

   • The quiescent current is typically 2.5mA when the supply voltage is 10V and there is no load.
   • This value can help in power budget calculations.

3. Output Current (Iout):

   • The device can provide up to 100mA continuously.
   • Ensure that the load does not exceed this limit to avoid overheating or damage.

4. Output Voltage Swing (Vos):

   • The output voltage swing is limited to 1.2V to 1.8V when the load is 1k惟 to ground.
   • This parameter is important for applications requiring precise output levels.

5. Slew Rate (SR):

   • The typical slew rate is 0.5V/渭s.
   • This rate affects the ability of the device to handle high-frequency signals.

6. Power Dissipation (Pd):

   • The maximum power dissipation is 650mW at an ambient temperature of 25掳C.
   • Proper heat sinking may be required for continuous operation at higher power levels.

7. Operating Temperature (Temp):

   • The device can operate and be stored in temperatures ranging from -40掳C to 85掳C.
   • Ensure the operating environment stays within these limits to maintain reliable performance.

(For reference only)