Details

---

BUY M48T59Y-70PC1U https://www.utsource.net/itm/p/12609060.html

Parameter	Description
Device Type	Real-Time Clock (RTC) with Integrated SRAM and I2C Interface
Manufacturer	STMicroelectronics
Package Type	SOIC-8
Operating Temperature	-40掳C to +85掳C
Supply Voltage Range	2.0V to 5.5V
Clock Accuracy	卤2 minutes per year at 25掳C
SRAM Size	512 bytes
I2C Address	User-programmable
Oscillator Type	Built-in 32.768 kHz oscillator
Backup Supply	Supports VBAT for backup power
Power Consumption	Low-power design, < 100 nA in backup mode

Instructions:

1. Powering the Device:

   • Connect the VCC pin to a supply voltage between 2.0V and 5.5V.
   • Connect the VBAT pin to a backup power source to retain data during main power loss.

2. Communication Setup:

   • Use the I2C interface to communicate with the device.
   • Set the I2C address as required using address pins or software configuration.

3. Initialization:

   • After powering up, initialize the RTC by setting the time and date registers via I2C commands.

4. Reading Time and Date:

   • Use specific I2C read commands to fetch current time and date information from the RTC registers.

5. Writing to SRAM:

   • Access the integrated SRAM using standard I2C write commands for storing user data.

6. Backup Mode:

   • Ensure VBAT is connected to maintain SRAM and RTC operation when VCC is not available.

7. Handling Power Failures:

   • Implement circuitry to switch from VCC to VBAT seamlessly during power interruptions.

8. Testing:

   • Verify correct operation by setting and reading back time/date values and checking SRAM retention after power cycles.

(For reference only)