Details

---

BUY XTR105PA https://www.utsource.net/itm/p/12609070.html

Below is the parameter table and instructions for the XTR105PA:

XTR105PA Parameter Table

Parameter	Symbol	Min	Typ	Max	Unit	Conditions
Supply Voltage	Vcc	4.5	7.5	36	V
Output Current	Iout	0	4	20	mA
Input Voltage Range	Vin	0	10	10	V
Common-Mode Input Voltage	Vcm	0	2.5	5	V
Differential Input Voltage	Vid	-10	0	10	mV
Input Bias Current	Ib	-100	0	100	nA
Output Compliance Voltage	Vcom	1.2	2.5	3.8	V
Temperature Coefficient	Tc	-25	0	25	ppm/掳C
Zero Offset Voltage	Vos	-5	0	5	mV
Span Error	SpanErr	-2	0	2	%
Nonlinearity	NL	-0.05	0	0.05	%
Thermal Resistance (Junction to Ambient)	R胃JA	-	150	-	掳C/W

Instructions for XTR105PA

1. Power Supply Connection:

   • Connect the positive supply voltage (Vcc) to the Vcc pin.
   • Connect the ground (GND) to the GND pin.

2. Input Signal Connection:

   • Connect the differential input signal to the IN+ and IN- pins.
   • Ensure the common-mode input voltage (Vcm) is within the specified range.

3. Output Configuration:

   • The output current (Iout) can be set by connecting the appropriate load resistor (Rl) between the OUT pin and the load.
   • The output compliance voltage (Vcom) should be considered to ensure proper operation.

4. Biasing and Calibration:

   • Adjust the zero offset voltage (Vos) using an external trimmer potentiometer if necessary.
   • Calibrate the span error (SpanErr) to ensure accurate output current.

5. Thermal Management:

   • Ensure adequate heat dissipation to keep the junction temperature within safe limits.
   • Use a heatsink if the power dissipation is significant.

6. Operating Conditions:

   • Operate the device within the specified temperature range to avoid performance degradation.
   • Monitor the temperature coefficient (Tc) to maintain accuracy over temperature variations.

7. Nonlinearity and Accuracy:

   • Check the nonlinearity (NL) to ensure the output current is linear with respect to the input voltage.
   • Use the device in applications where high accuracy is required, such as industrial process control and measurement systems.

8. Storage and Handling:

   • Store the device in a dry, cool place to prevent moisture damage.
   • Handle the device with care to avoid static discharge and physical damage.

By following these instructions and parameters, you can ensure optimal performance and reliability of the XTR105PA in your application.

(For reference only)