Details
BUY MIP2K4 https://www.utsource.net/itm/p/12609112.html
| Parameter | Description | Value |
|---|---|---|
| Part Number | Full part number | MIP2K4 |
| Type | Device type | MOSFET Driver |
| Package | Package type | SOIC-8 |
| Supply Voltage (VDD) | Operating supply voltage range | 4.5V to 20V |
| Input Voltage (VIN) | Input logic voltage range | 1.8V to 5.5V |
| Output Current (IOUT) | Maximum output current per channel | 卤2A (peak) |
| Propagation Delay (tPD) | Time delay from input to output | 30ns (typical) |
| Operating Temperature (Toper) | Operating temperature range | -40掳C to +125掳C |
| Storage Temperature (Tstg) | Storage temperature range | -65掳C to +150掳C |
| Quiescent Current (IQ) | Supply current when no load | 2mA (max) at VDD = 15V |
| Channel Isolation | Electrical isolation between channels | 50惟 (min) at VDD = 15V |
| ESD Protection | Electrostatic discharge protection | 卤2kV (HBM) |
| Output Rise/Fall Time (tr/f) | Output rise and fall time | 10ns (typical) |
Instructions for Use
Power Supply Connection:
- Connect the VDD pin to the power supply within the specified range (4.5V to 20V).
- Ensure the GND pin is connected to the ground.
Input Signal:
- Apply the input signal to the IN pin. The logic level should be within the VIN range (1.8V to 5.5V).
- For high-side drive, connect the IN pin to a high logic level.
- For low-side drive, connect the IN pin to a low logic level.
Output Configuration:
- Connect the OUT pin to the gate of the MOSFET or other load.
- Ensure the load is properly rated for the maximum output current (卤2A peak).
Thermal Management:
- If operating at high currents or temperatures, ensure adequate heat dissipation.
- Consider using a heatsink if necessary.
ESD Precautions:
- Handle the device with care to avoid ESD damage.
- Use proper ESD protection equipment and procedures.
Testing and Troubleshooting:
- Verify the supply voltage and input signals before testing.
- Monitor the output current and temperature during operation.
- Refer to the datasheet for detailed troubleshooting tips and application notes.
View more about MIP2K4 on main site