Details

---

BUY SN65LVDS180DRG4 https://www.utsource.net/itm/p/12609123.html

Parameter	Symbol	Conditions	Min	Typ	Max	Unit
Supply Voltage	VCC	Operating	2.25	-	3.6	V
Output Current per Line	IOL/IOH	VOD = 400 mV, RL = 100 惟	卤20	-	卤28	mA
Output Voltage Swing	VOD	RL = 100 惟	350	400	450	mV
Input Voltage High Level	VIH	IOH = -4 mA	1.2	-	VCC	V
Input Voltage Low Level	VIL	IOL = 4 mA	0	-	0.8	V
Propagation Delay	tPD	Differential Input	-	3.7	-	ns
Skew	tSKEW	Differential Input	-	0.3	-	ns
Power-down Current	IDD	VCC = 3.3 V, Power-down mode	-	10	-	渭A

Instructions for SN65LVDS180DRG4

1. Power Supply Requirements:

   • Ensure the supply voltage (VCC) is within the range of 2.25 V to 3.6 V.

2. Signal Levels:

   • For proper operation, ensure that input signals are within the specified high and low voltage levels (VIH and VIL).

3. Output Configuration:

   • Connect termination resistors (typically 100 惟) between differential output pairs to maintain signal integrity and achieve the desired output voltage swing (VOD).

4. Propagation Delay and Skew:

   • Account for the propagation delay (tPD) and skew (tSKEW) in your timing calculations to ensure reliable data transmission.

5. Power-down Mode:

   • When not in use, place the device in power-down mode to minimize current consumption. The typical power-down current (IDD) is 10 渭A at VCC = 3.3 V.

6. Handling Static Electricity:

   • Handle the device with care to avoid damage from static electricity. Use appropriate ESD protection measures.

7. Operating Temperature Range:

   • Ensure the operating temperature range is suitable for the application environment. Check the datasheet for specific temperature ranges.

8. Mounting and Layout:

   • Follow recommended PCB layout guidelines for optimal performance, including proper grounding and decoupling capacitor placement near the VCC pin.

(For reference only)