Details

---

BUY FSA3157L6X https://www.utsource.net/itm/p/12609138.html

Below is the parameter table and instructions for the FSA3157L6X:

Parameter Table

Parameter	Symbol	Min	Typ	Max	Unit	Conditions
Supply Voltage	VDD	2.7	-	5.5	V
Supply Current (Quiescent)	IQ	-	0.1	1.0	渭A	VDD = 5V, TA = 25掳C
Output Current (Source)	IOS	0	100	200	mA	VDD = 5V, VOUT = 2.5V
Output Current (Sink)	IOSK	0	100	200	mA	VDD = 5V, VOUT = 2.5V
Input Voltage Range	VIN	0	-	VDD	V
Output Voltage Range	VOUT	0	-	VDD	V
On-State Resistance	RON	-	100	150	m惟	VDD = 5V, IOUT = 100mA
Off-State Leakage Current	ILEAK	-	1.0	5.0	nA	VDD = 5V, VOUT = 0V
Operating Temperature	Toper	-40	-	85	掳C
Storage Temperature	Tstg	-65	-	150	掳C

Instructions

1. Power Supply:

   • Ensure the supply voltage (VDD) is within the range of 2.7V to 5.5V.
   • The quiescent current (IQ) is typically very low, but it can increase under certain conditions.

2. Input and Output:

   • The input voltage (VIN) should be within the range of 0V to VDD.
   • The output voltage (VOUT) can vary from 0V to VDD, depending on the application.

3. Current Handling:

   • The device can source or sink up to 200mA of current. Ensure that the load does not exceed this limit to avoid damage.
   • The on-state resistance (RON) is typically around 100m惟, which can affect power dissipation and efficiency.

4. Temperature Considerations:

   • The operating temperature range is from -40掳C to 85掳C. Ensure the device is used within this range to maintain reliability.
   • The storage temperature range is from -65掳C to 150掳C. This is important for handling and storage conditions.

5. Leakage Current:

   • The off-state leakage current (ILEAK) is typically very low, around 1nA, but can go up to 5nA. This is important for low-power applications.

6. Handling and Mounting:

   • Handle the device with care to avoid static damage.
   • Follow recommended soldering profiles to ensure proper mounting and avoid thermal stress.

7. Application Notes:

   • For optimal performance, use appropriate decoupling capacitors near the power supply pins.
   • Ensure the PCB layout minimizes parasitic inductance and resistance.

By following these parameters and instructions, you can ensure reliable and efficient operation of the FSA3157L6X.

(For reference only)