Details

---

BUY 2SD1415A https://www.utsource.net/itm/p/12609146.html

Parameter	Symbol	Value	Unit
Collector-Emitter Voltage	VCEO	600	V
Collector-Base Voltage	VCBO	600	V
Emitter-Base Voltage	VEBO	7	V
Continuous Collector Current	IC	3	A
Pulse Collector Current (tp = 8.3 ms, IF = 1.5 A)	ICM	8	A
Power Dissipation (TA = 25掳C)	PT	60	W
Power Dissipation (TC = 25掳C)	PC	90	W
Junction Temperature	TJ	-55 to 150	掳C
Storage Temperature	TSTG	-55 to 150	掳C
Base-Emitter Saturation Voltage (IC = 150 mA, IB = 15 mA)	VBE(sat)	1.8	V
Collector-Emitter Saturation Voltage (IC = 150 mA, IB = 15 mA)	VCE(sat)	1.2	V
Forward Current Transfer Ratio (IC = 150 mA, VCE = 5 V)	hFE	10 to 100	-

Instructions for Use:

1. Mounting and Handling:

   • Ensure proper heat sinking when operating at high power levels.
   • Handle the transistor with care to avoid mechanical stress on the leads and body.

2. Electrical Connections:

   • Connect the collector (C), base (B), and emitter (E) terminals correctly to avoid damage.
   • Use appropriate wire gauges to handle the current ratings.

3. Thermal Management:

   • Ensure adequate cooling to keep the junction temperature within the specified range.
   • Use thermal compound between the transistor and heat sink for better thermal conductivity.

4. Operating Conditions:

   • Do not exceed the maximum ratings for voltage, current, and power dissipation.
   • Operate within the recommended operating conditions to ensure reliable performance.

5. Storage:

   • Store in a dry, cool place to prevent moisture and temperature-related damage.
   • Avoid exposure to extreme temperatures and humidity.

6. Testing:

   • Use a multimeter or transistor tester to verify the functionality before installation.
   • Perform initial testing at low currents and voltages to ensure proper operation.

7. Safety Precautions:

   • Always disconnect power before making connections or changes to the circuit.
   • Use protective equipment such as gloves and safety glasses when handling high-voltage circuits.

(For reference only)