Details

---

BUY F10P20F https://www.utsource.net/itm/p/12609184.html

Parameter	Symbol	Min	Typical	Max	Unit	Description
Input Voltage	Vin	85	-	264	V	AC Input Voltage Range
Output Voltage	Vout	12	-	12	V	DC Output Voltage
Output Current	Iout	-	2.0	2.0	A	Continuous Output Current
Efficiency	畏	-	87	90	%	Typical Efficiency at Full Load
Power Factor	PF	0.9	-	1.0	-	Power Factor at Full Load
No-Load Current	I NL	-	0.01	0.03	A	No-Load Input Current
Ripple & Noise	VRMS	-	50	100	mVp-p	Output Ripple and Noise
Operating Temp.	Toper	-40	-	85	掳C	Operating Temperature Range
Storage Temp.	Tstore	-40	-	85	掳C	Storage Temperature Range
Protection	-	-	-	-	-	Overvoltage, Overcurrent, Short-Circuit Protection

Instructions for Use:

1. Input Connection:

   • Connect the AC input to the F10P20F using the provided input terminals.
   • Ensure the input voltage is within the specified range (85V to 264V AC).

2. Output Connection:

   • Connect the DC output to your load using the output terminals.
   • The output voltage is fixed at 12V DC with a maximum current of 2.0A.

3. Mounting:

   • Mount the F10P20F in a well-ventilated area to ensure proper heat dissipation.
   • Avoid placing it in direct sunlight or near heat sources.

4. Operation:

   • Turn on the power supply by connecting it to the AC source.
   • Monitor the output voltage and current to ensure they are within the specified limits.

5. Protection Features:

   • The F10P20F includes overvoltage, overcurrent, and short-circuit protection.
   • If any of these conditions occur, the power supply will shut down to prevent damage.

6. Maintenance:

   • Regularly inspect the connections and terminals for signs of wear or damage.
   • Clean the power supply with a dry cloth to remove dust and debris.

7. Storage:

   • Store the F10P20F in a dry, cool place with temperatures between -40掳C and 85掳C.

8. Safety Precautions:

   • Do not operate the power supply in environments with high humidity or corrosive gases.
   • Always disconnect the power supply from the AC source before performing any maintenance or repairs.

(For reference only)