Details

---

BUY CM2030-A0TR https://www.utsource.net/itm/p/12609211.html

Parameter	Description	Value
Part Number	Component Identifier	CM2030-A0TR
Type	Chip Capacitor	-
Capacitance	Nominal Capacitance	10 μF
Voltage Rating (DC)	Maximum DC Voltage	6.3 V
Tolerance	Capacitance Tolerance	±10%
Operating Temperature	Temperature Range	-55°C to +125°C
Case Size	Physical Dimensions	2.0 mm x 3.0 mm
Termination	Lead Type	SMD
Dielectric Material	Material Used	X7R
ESR (Equivalent Series Resistance)	Maximum ESR at 100 kHz	0.1 Ω
Dissipation Factor	Dissipation Factor at 1 kHz	≤ 1.5%
Insulation Resistance	Minimum Insulation Resistance at 25°C	100 MΩ
RoHS Compliance	Environmental Compliance	RoHS Compliant

Instructions for Use:

1. Mounting: Place the capacitor on the PCB with the correct orientation. The polarity is not critical as this is a non-polarized capacitor.
2. Soldering: Use a soldering iron with a temperature setting of 350°C to 400°C. Ensure that the soldering time does not exceed 3 seconds per pad to avoid damage.
3. Storage: Store the capacitors in a dry, cool place away from direct sunlight. Avoid exposure to high humidity or corrosive environments.
4. Handling: Handle the capacitors with care to avoid mechanical stress or damage to the leads.
5. Testing: After mounting, test the board to ensure proper functionality. Check for any shorts or open circuits.
6. Cleaning: If cleaning is necessary, use a mild, non-corrosive solvent and ensure the solvent is fully evaporated before power-on.

Notes:

• Always refer to the latest datasheet for the most accurate and detailed information.
• Ensure that the operating conditions do not exceed the specified limits to prevent premature failure or damage.

(For reference only)