Details
BUY PIC18F67K40T-I/PT https://www.utsource.net/itm/p/12609217.html
| Parameter | Description | Value/Options |
|---|---|---|
| Package Type | The type of package used for the device. | TQFP (44-pin) |
| Operating Voltage (Vdd) | Range of supply voltage that can be applied to the device. | 1.8V to 3.6V |
| Temperature Range | Operating temperature range of the device. | -40掳C to +85掳C |
| Program Memory Type | Type of memory used for storing program instructions. | Flash |
| Program Memory Size | Size of the program memory available for storing code. | 64KB |
| Data RAM | Amount of data memory available for variable storage during execution. | 4KB |
| EEPROM Data Memory | Non-volatile memory for data retention when power is off. | 2KB |
| Clock Speed | Maximum frequency at which the microcontroller can operate. | 32 MHz |
| ADC Channels | Number of analog-to-digital converter channels. | 16 channels |
| Comparator Channels | Number of comparator channels available. | 4 channels |
| Timers | Number and type of timers available. | 5 x 16-bit Timers |
| USART Modules | Number of Universal Synchronous/Asynchronous Receiver/Transmitter modules. | 2 |
| SPI/I2C Modules | Number of Serial Peripheral Interface and Inter-Integrated Circuit modules. | 2 SPI, 2 I2C |
| CAN Modules | Number of Controller Area Network modules. | 1 |
| USB Modules | Number of Universal Serial Bus modules. | 1 |
| I/O Pins | Total number of Input/Output pins available. | 37 |
| Brown-out Reset | Feature that resets the device if the voltage drops below a certain level. | Yes |
| Watchdog Timer | Timer that resets the system if the main application fails to reset it. | Yes |
Instructions for Use:
- Power Supply: Ensure the operating voltage (Vdd) is within the specified range of 1.8V to 3.6V.
- Programming: Use a PIC programmer compatible with the PIC18F67K40T-I/PT to upload your firmware.
- Clock Configuration: Configure the internal or external oscillator as per your application requirements.
- Peripheral Setup: Initialize peripherals like ADC, comparators, timers, USART, SPI/I2C, CAN, and USB according to your project needs.
- Pin Configuration: Set up the I/O pins as input or output based on your application logic.
- Reset Conditions: Utilize the brown-out reset and watchdog timer features to ensure reliable operation under varying power conditions.
- Development Environment: Use MPLAB X IDE along with the XC8 compiler for writing and debugging code.
- Datasheet Reference: Always refer to the official Microchip datasheet for detailed specifications and advanced configurations.
This table and these instructions provide a concise overview of the key parameters and operational guidelines for the PIC18F67K40T-I/PT microcontroller.
(For reference only)View more about PIC18F67K40T-I/PT on main site