Details

---

BUY SH2127C https://www.utsource.net/itm/p/12609226.html

Parameter	Symbol	Conditions	Min	Typ	Max	Unit
Supply Voltage	VDD	Operating condition	2.7	-	5.5	V
Output Current	IOUT	Continuous	-	100	300	mA
Quiescent Current	IQ	VDD = 5V	-	10	20	渭A
Dropout Voltage	VDROPOUT	IOUT = 100mA	-	200	400	mV
Load Regulation	未VL	IOUT: 0mA to 100mA	-	0.5	2	%
Line Regulation	未VL	VDD: 2.7V to 5.5V	-	0.2	1	%
Ripple Rejection	RR	1kHz	-	60	80	dB
Operating Junction Temperature	TJ	Continuous	-40	-	125	掳C
Storage Temperature	TSTG	-	-40	-	150	掳C

Instructions for SH2127C

1. Power Supply Connection:

   • Connect the positive terminal of the power supply to the VDD pin.
   • Connect the negative terminal (ground) to the GND pin.

2. Output Configuration:

   • Connect the load to the VOUT pin and ensure it does not exceed the maximum output current rating.

3. Capacitor Requirements:

   • Place a 1渭F capacitor between VOUT and GND close to the device for stability.
   • A 0.1渭F capacitor between VDD and GND is recommended for noise suppression.

4. Thermal Considerations:

   • Ensure adequate heat dissipation if operating near the maximum output current or in high ambient temperatures.
   • Refer to the thermal resistance specifications for detailed heat management.

5. Operating Environment:

   • Operate within the specified temperature ranges to avoid damage and ensure reliable performance.

6. Handling Precautions:

   • Handle with care to prevent electrostatic discharge (ESD) damage.
   • Follow standard ESD protection practices during installation and handling.

(For reference only)