Details
BUY AD2S82AHP-PLCC https://www.utsource.net/itm/p/12609237.html
| Parameter | Description |
|---|---|
| Part Number | AD2S82AHP-PLCC |
| Function | Resolver-to-Digital Converter |
| Package Type | PLCC |
| Interface | SPI |
| Resolution | 10 bits |
| Tracking Rate | 3,600 rpm (1 kHz) |
| Operating Voltage | 5 V |
| Current Consumption | 70 mA (typical) |
| Temperature Range | -40掳C to +85掳C |
| Input Signal | Sinusoidal or trapezoidal |
| Output Format | Parallel or serial |
| Supply Current | 100 mA (maximum) |
| Accuracy | 卤1 LSB (over full temperature range) |
| Mounting Type | Surface mount |
Instructions for Use
Power Supply Connection: Connect the 5V supply voltage to the designated pins on the AD2S82AHP-PLCC. Ensure that the power supply is stable and within the specified operating range.
Signal Input: Provide a sinusoidal or trapezoidal input signal to the converter. The input signals should be connected to the appropriate input pins as specified in the datasheet.
Configuration via SPI: Configure the device settings using the SPI interface. Refer to the specific commands and register configurations detailed in the datasheet.
Output Data Retrieval: Read the digital output data from the device either through parallel or serial communication based on your setup.
Thermal Management: Ensure proper thermal management by adhering to the recommended PCB layout guidelines provided in the datasheet to handle the maximum current consumption.
Testing and Validation: After installation, test the device under various conditions within the operational temperature range to ensure it meets performance specifications.
For detailed pin configuration, command codes, and further technical information, refer to the official AD2S82AHP-PLCC datasheet provided by Analog Devices.
(For reference only)View more about AD2S82AHP-PLCC on main site