Details

---

BUY ST62T15C6. https://www.utsource.net/itm/p/12609249.html

Parameter	Symbol	Min	Typical	Max	Unit	Conditions
Supply Voltage	Vcc	2.0	3.3	5.5	V	Operating Range
Standby Current	Icc	-	1.0	2.0	渭A	Vcc = 3.3V, Ta = 25掳C
Active Current	Icc	-	10	20	mA	Vcc = 3.3V, Ta = 25掳C, All Inputs Low
Input High Voltage	VIH	2.0	-	5.5	V	Input Level
Input Low Voltage	VIL	0	-	0.8	V	Input Level
Output High Voltage	VOH	2.4	-	Vcc	V	IOH = -1mA, Vcc = 3.3V
Output Low Voltage	VOL	0	-	0.4	V	IOL = 1mA, Vcc = 3.3V
Operating Temperature	Topr	-40	-	85	掳C	Industrial Range
Storage Temperature	Tstg	-65	-	150	掳C

Instructions for Use:

1. Power Supply:

   • Ensure the supply voltage (Vcc) is within the specified range of 2.0V to 5.5V.
   • Use a stable power source to avoid voltage fluctuations that can affect performance.

2. Current Consumption:

   • The device operates with low standby current (1.0 渭A typical at 3.3V) and active current (10 mA typical at 3.3V).
   • Design your circuit to minimize unnecessary power consumption during standby and active modes.

3. Input Levels:

   • For a valid high input, ensure the voltage is between 2.0V and 5.5V.
   • For a valid low input, ensure the voltage is between 0V and 0.8V.

4. Output Levels:

   • When the output is high, the voltage should be at least 2.4V (up to Vcc) with a sink current of -1mA.
   • When the output is low, the voltage should be no more than 0.4V with a source current of 1mA.

5. Temperature Considerations:

   • The device is designed to operate in temperatures ranging from -40掳C to 85掳C.
   • Store the device in temperatures between -65掳C and 150掳C to ensure long-term reliability.

6. Handling and Storage:

   • Handle the device with care to avoid static damage.
   • Store in a dry environment to prevent moisture damage.

7. Circuit Design:

   • Use appropriate decoupling capacitors near the power pins to filter out noise and stabilize the supply voltage.
   • Ensure all connections are secure and free from shorts or open circuits.

8. Testing:

   • Test the device under typical operating conditions to verify its performance.
   • Refer to the datasheet for detailed test procedures and recommended test setups.

By following these guidelines, you can ensure optimal performance and reliability of the ST62T15C6 in your application.

(For reference only)