Details

---

BUY RP710012 https://www.utsource.net/itm/p/12609254.html

Parameter	Description
Part Number	RP710012
Type	Voltage Regulator
Output Voltage	5V
Input Voltage	3.6V to 16V
Output Current	Up to 1A
Quiescent Current	50渭A (typical)
Dropout Voltage	1.2V (max at 1A)
Operating Temp	-40掳C to +85掳C
Package	TO-252 (DPAK)
Features	Short-circuit and thermal overload protection

Instructions for Use:

1. Power Supply Connection: Connect the input voltage between the VIN pin and GND. Ensure that the input voltage is within the specified range of 3.6V to 16V.
2. Output Connection: Connect the load to the VOUT pin and GND. The maximum output current should not exceed 1A.
3. Heat Management: For applications where the device may approach its maximum operating temperature, consider adding a heat sink or ensuring adequate airflow.
4. Protection Circuits: The RP710012 includes built-in short-circuit and thermal overload protection. However, it is recommended to design external protection circuits if the application requires additional safety measures.
5. Capacitors: Place a 1渭F ceramic capacitor close to the VIN pin and a 1渭F ceramic capacitor close to the VOUT pin for stability.
6. PCB Layout: Ensure proper PCB layout practices to minimize noise and parasitic effects. Keep traces short and direct, especially for power and ground connections.

(For reference only)