Details

---

BUY 2SA1303P https://www.utsource.net/itm/p/12609258.html

Parameter	Symbol	Conditions	Min	Typ.	Max	Unit
Collector-Emitter Voltage	VCEO	IC = 0mA, IE = 0mA	-	-	45	V
Emitter-Base Voltage	VEBO	IC = -10mA, IB = 0mA	-	-	6	V
Collector Current	IC	VCE = 30V	-	-	1	A
Base Current	IB	VCE = 30V, IC = 1A	-	-	0.1	A
DC Current Gain	hFE	IC = 150mA, VCE = 5V	20	100	400	-
Transition Frequency	fT	IC = 1mA, VCE = 3V	-	1.5	-	MHz
Power Dissipation	PD	Tc = 25掳C	-	-	62.5	mW
Junction Temperature	TJ	Operating	-55	-	150	掳C
Storage Temperature	TSTG	Non-operating	-65	-	150	掳C

Instructions for Use:

1. Mounting and Handling:

   • Handle the 2SA1303P with care to avoid mechanical damage.
   • Ensure proper heat dissipation if operating near maximum power ratings.

2. Electrical Connections:

   • Verify all connections are secure and correct to prevent short circuits or incorrect biasing.
   • Use appropriate decoupling capacitors as needed to stabilize the circuit.

3. Biasing and Operation:

   • Operate within specified voltage and current limits to ensure reliable performance.
   • For optimal performance, operate within the typical range of parameters.

4. Thermal Considerations:

   • Monitor junction temperature to avoid exceeding the maximum allowable limit.
   • Provide adequate cooling if necessary, especially in high-power applications.

5. Storage and Environment:

   • Store in a dry, cool place away from direct sunlight.
   • Avoid exposing the device to environments outside the specified storage temperature range.

(For reference only)