Details

---

BUY MPY-S-112-A https://www.utsource.net/itm/p/12609264.html

Parameter	Description	Value
Part Number	Full part number	MPY-S-112-A
Type	Component type	Pressure Sensor
Measurement Range	Range of pressure measurement	0 to 100 psi
Output Signal	Type of output signal	Analog (0-5V)
Supply Voltage	Operating voltage range	5 VDC
Quiescent Current	Current consumption at no load	< 10 mA
Operating Temperature	Temperature range for operation	-40掳C to +85掳C
Storage Temperature	Temperature range for storage	-40掳C to +125掳C
Humidity	Relative humidity range	0% to 95% RH (non-condensing)
Response Time	Time to reach 90% of final value	< 10 ms
Accuracy	Measurement accuracy	卤1% FS
Mounting Orientation	Orientation for optimal performance	Vertical
Package Type	Type of package	TO-5
Weight	Weight of the sensor	5 g

Instructions for Use:

1. Power Supply: Connect the supply voltage (5 VDC) to the designated pin on the sensor.
2. Signal Output: The analog output (0-5V) is proportional to the pressure measured. Connect this output to your data acquisition system or microcontroller.
3. Mounting: Mount the sensor vertically for optimal performance. Ensure that the sensor is not exposed to excessive mechanical stress.
4. Environmental Conditions: Operate the sensor within the specified temperature and humidity ranges to ensure reliable performance.
5. Calibration: If necessary, calibrate the sensor using a known pressure source to ensure accuracy.
6. Handling: Handle the sensor with care to avoid damage to the sensitive components.
7. Storage: Store the sensor in a dry, cool place away from direct sunlight and extreme temperatures.
8. Wiring: Refer to the wiring diagram provided in the datasheet for correct connection of power and signal lines.

(For reference only)