Details

---

BUY BTS3160D https://www.utsource.net/itm/p/12609265.html

Parameter	Symbol	Conditions	Min	Typ	Max	Unit
Continuous Current	I_cont	V_DS = 12V, T_C = 70°C	-	60	-	A
Peak Current	I_peak	Pulse Width ≤ 1ms, Rep. Rate ≤ 2Hz	-	120	-	A
On-State Resistance	R_DS(on)	V_GS = 10V, I_D = 60A	3.5	-	4.5	mΩ
Gate Charge	Q_g	V_DS = 12V, I_D = 60A	-	80	-	nC
Input Capacitance	Ciss	V_DS = 12V	-	1800	-	pF
Output Capacitance	Coff	V_DS = 12V	-	450	-	pF
Switching Time (turn-on)	t_on	V_DS = 12V, I_D = 60A	-	90	-	ns
Switching Time (turn-off)	t_off	V_DS = 12V, I_D = 60A	-	50	-	ns
Thermal Resistance (Junction to Case)	R_thJC	-	-	0.6	-	°C/W

Instructions for Use:

1. Mounting and Handling:

   • Ensure proper heat sinking to manage thermal resistance.
   • Handle with care to avoid damage to the pins and body.

2. Electrical Connections:

   • Connect the drain (D) to the load or power supply.
   • Connect the source (S) to the common ground.
   • Apply gate voltage (G) relative to the source for switching.

3. Operating Conditions:

   • Do not exceed the maximum continuous current of 60A.
   • For peak currents up to 120A, ensure pulse width is ≤ 1ms and repetition rate is ≤ 2Hz.

4. Gate Drive:

   • Apply a gate-source voltage of at least 10V to minimize on-state resistance.
   • Keep gate drive impedance low to reduce switching times.

5. Thermal Management:

   • Monitor junction temperature; keep it below 150°C to prevent overheating.
   • Use adequate cooling solutions like heatsinks or forced air cooling.

6. Storage and Packaging:

   • Store in a dry, cool place away from direct sunlight.
   • Follow anti-static precautions during handling and storage.

7. Safety Precautions:

   • Always use appropriate personal protective equipment when handling high-power components.
   • Ensure all connections are secure to prevent electrical hazards.

(For reference only)