Details

---

BUY AK4384VT https://www.utsource.net/itm/p/12609284.html

Parameter	Description	Value	Unit
Power Supply Voltage	Operating voltage range for the power supply	2.7 to 5.5	V
Differential Input Voltage	Maximum differential input voltage	卤1.0	V
Signal-to-Noise Ratio (SNR)	SNR at typical conditions	120	dB
Total Harmonic Distortion + Noise (THD+N)	THD+N at typical conditions	-114	dB
Sampling Frequency	Range of sampling frequencies supported	8 to 192	kHz
Channel Count	Number of channels supported	2	ch
Package Type	Type of package used	SSOP16	-
Operating Temperature	Temperature range for operation	-40 to 85	掳C

Instructions for AK4384VT

1. Power Supply Connection:

   • Connect the power supply pins to a stable voltage source within the specified range of 2.7V to 5.5V.
   • Ensure proper decoupling capacitors are placed close to the power supply pins to minimize noise.

2. Input Configuration:

   • Connect differential audio input signals to the designated input pins.
   • Ensure the input signal does not exceed the maximum differential input voltage of 卤1.0V.

3. Sampling Frequency Setup:

   • Set the sampling frequency according to the application requirements, ensuring it is within the supported range of 8kHz to 192kHz.
   • Configure the appropriate registers or use external clocking mechanisms as per the datasheet recommendations.

4. Output Configuration:

   • Connect the output pins to the intended audio processing or amplification stages.
   • Verify that the output configuration matches the expected format and resolution.

5. Thermal Considerations:

   • Place the device in an area with adequate airflow or cooling to ensure operating temperatures remain between -40掳C and 85掳C.
   • Monitor temperature during operation, especially under high load conditions.

6. Testing and Verification:

   • Perform initial testing with known good signals to verify proper functionality.
   • Use diagnostic tools such as oscilloscopes and spectrum analyzers to validate performance parameters like SNR and THD+N.

For detailed register settings and advanced configurations, refer to the specific sections in the AK4384VT datasheet provided by the manufacturer.

(For reference only)