Details

---

BUY 95080-6 https://www.utsource.net/itm/p/12609289.html

Parameter	Value
Part Number	95080-6
Description	Connector, Terminal Block
Series	95080
Pitch	7.62 mm (0.300 in)
Number of Positions	6
Current Rating	10 A
Voltage Rating	300 V AC/DC
Temperature Range	-40掳C to +105掳C
Material	Nylon PA66
Color	Natural
Mounting	Through-Hole
Termination	Screw Terminal
Insulation Resistance	>500 M惟 at 500 V DC
Dielectric Strength	2500 V AC for 1 minute

Instructions:

1. Preparation:

   • Ensure the terminal block is clean and free from debris.
   • Prepare the wires by stripping the insulation to the appropriate length (typically 6-8 mm).

2. Installation:

   • Insert the stripped wire into the terminal slot.
   • Tighten the screw securely to ensure a good electrical connection.
   • Repeat for all positions as needed.

3. Mounting:

   • Mount the terminal block on a suitable surface using the through-hole mounting method.
   • Ensure the surface is flat and secure to prevent any movement during operation.

4. Testing:

   • After installation, perform a visual inspection to ensure all connections are tight and secure.
   • Use a multimeter to check for continuity and correct voltage levels if applicable.

5. Maintenance:

   • Periodically inspect the terminal block for signs of wear or loose connections.
   • Retighten screws if necessary and replace any damaged components.

6. Safety:

   • Always disconnect power before working with electrical components.
   • Follow local electrical codes and safety guidelines.

(For reference only)