Details

---

BUY C122M1 https://www.utsource.net/itm/p/12609308.html

Parameter	Description	Value
Part Number	Component Identifier	C122M1
Type	Capacitor Type	Multilayer Ceramic
Capacitance	Nominal Capacitance	120 pF
Tolerance	Capacitance Tolerance	卤5%
Voltage Rating	Maximum DC Voltage	50 V
Temperature Coefficient	Change in Capacitance with Temperature	NPO (0 卤30 ppm/掳C)
Operating Temperature Range	Temperature Range for Operation	-55掳C to +125掳C
Case Size	Physical Dimensions	0805 (2.0 x 1.25 mm)
Termination	Lead Finish	Tin (Sn)
Mounting	Mounting Method	Surface Mount
Compliance	Standards Compliance	RoHS, REACH

Instructions:

1. Handling:

   • Handle the capacitor with care to avoid mechanical damage.
   • Use appropriate ESD (Electrostatic Discharge) protection to prevent damage from static electricity.

2. Soldering:

   • Preheat the PCB to 100-120掳C before soldering.
   • Use a soldering iron with a temperature of 350掳C for no more than 10 seconds per joint.
   • Ensure the solder joints are clean and free of voids.

3. Storage:

   • Store the capacitors in a dry environment at temperatures between -10掳C and +40掳C.
   • Avoid exposure to high humidity or direct sunlight.

4. Mounting:

   • Place the capacitor on the PCB according to the polarity markings if applicable.
   • Ensure the capacitor is securely mounted and aligned with the PCB pads.

5. Testing:

   • After assembly, test the circuit to ensure the capacitor is functioning correctly.
   • Check for any shorts or open circuits.

6. Disposal:

   • Dispose of the capacitor in accordance with local environmental regulations.
   • Recycle if possible.

(For reference only)