Details

---

BUY 26LS33AC https://www.utsource.net/itm/p/12609326.html

Parameter	Symbol	Min	Typical	Max	Unit	Notes
Supply Voltage	Vcc	4.5	5.0	5.5	V
Output Voltage (High)	VOH	2.4	3.5	5.0	V	@ IOL = -4mA, VCC = 5V
Output Voltage (Low)	VOL	0.0	0.4	0.5	V	@ IOH = 4mA, VCC = 5V
Input Voltage (High)	VIH	2.0	3.5	5.0	V
Input Voltage (Low)	VIL	0.0	1.5	2.0	V
Propagation Delay Time	tpd	6	9	12	ns	@ VCC = 5V, TA = 25掳C
Power Consumption	ICC	10	20	40	渭A	@ VCC = 5V, No Load
Operating Temperature	TA	-40		85	掳C
Storage Temperature	Tstg	-65		150	掳C

Instructions for Use:

1. Power Supply:

   • Ensure the supply voltage (Vcc) is within the specified range of 4.5V to 5.5V.
   • Connect the Vcc pin to a stable power source.

2. Input Signals:

   • Apply input signals (VIH, VIL) within the specified voltage ranges to avoid damage or incorrect operation.
   • Ensure input signals are clean and stable to prevent false triggering.

3. Output Signals:

   • The output voltage levels (VOH, VOL) should be within the specified ranges to ensure proper logic levels.
   • Use appropriate load resistors if necessary to match the output current requirements.

4. Propagation Delay:

   • Account for the propagation delay time (tpd) in your timing calculations to ensure reliable operation.

5. Temperature Considerations:

   • Operate the device within the specified operating temperature range (-40掳C to 85掳C).
   • Store the device within the storage temperature range (-65掳C to 150掳C).

6. Power Consumption:

   • Monitor the power consumption (ICC) to ensure it does not exceed the maximum rating, especially under no-load conditions.

7. Handling:

   • Handle the device with care to avoid static discharge, which can damage sensitive components.
   • Follow standard ESD (Electrostatic Discharge) precautions when handling the device.

8. Mounting:

   • Ensure proper mounting and soldering techniques to avoid mechanical stress and ensure good electrical connections.

By following these instructions, you can ensure optimal performance and reliability of the 26LS33AC component.

(For reference only)