Details

---

BUY ADM1185ARMZ-1REEL7 https://www.utsource.net/itm/p/12609332.html

Parameter	Description
Part Number	ADM1185ARMZ-1REEL7
Function	Digital Hot Swap Controller with I2C Interface and Fault Reporting
Package Type	10-Lead MSOP (MS)
Supply Voltage	VDD: 4.5V to 14V
Operating Temperature	-40掳C to +85掳C
Quiescent Current	600 渭A (Typical)
Output Current Limit	Programmable from 0.5 A to 5 A
I2C Interface	Compatible with Standard and Fast Mode
Fault Protection	Overcurrent, Undervoltage, Overvoltage, Thermal Shutdown
Pin Count	10
Reel Quantity	1000

Instructions for Use:

1. Power Supply Connection: Connect the VDD pin to a supply voltage between 4.5V and 14V. Ensure proper decoupling capacitors are placed close to the VDD pin.

2. I2C Communication: Configure the I2C address using the address pins. Ensure pull-up resistors on the SDA and SCL lines. Communicate with the device using standard or fast-mode I2C protocols.

3. Current Limit Setting: Program the current limit through the I2C interface within the range of 0.5 A to 5 A.

4. Monitoring and Fault Handling: Monitor fault conditions via the I2C interface. The device reports overcurrent, undervoltage, overvoltage, and thermal shutdown events.

5. Thermal Management: Ensure adequate heat dissipation, especially when operating at higher currents or in high ambient temperatures.

6. Layout Considerations: Keep power traces short and wide to minimize resistance and inductance. Place bypass capacitors as close as possible to the device.

7. Storage and Handling: Store in original packaging until ready for use. Follow ESD handling precautions during assembly.

8. Mounting: Mount on a PCB using standard surface mount technology (SMT) processes suitable for MSOP packages.

(For reference only)