Details

---

BUY 4G4B41 https://www.utsource.net/itm/p/12609337.html

Parameter	Description	Value
Part Number	Component Identifier	4G4B41
Type	Component Type	IC
Function	Primary Function	Logic Gate
Technology	Manufacturing Technology	CMOS
Package	Encapsulation Type	DIP-14
Supply Voltage (Vcc)	Operating Voltage Range	2V to 6V
Operating Temperature	Temperature Range	-40掳C to 85掳C
Input Voltage (VIH)	High-Level Input Voltage	3.5V (Min)
Input Voltage (VIL)	Low-Level Input Voltage	0.8V (Max)
Output Voltage (VOH)	High-Level Output Voltage	3.5V (Min)
Output Voltage (VOL)	Low-Level Output Voltage	0.4V (Max)
Propagation Delay Time (tpd)	Delay Time	15ns (Typical)
Power Consumption (ICC)	Quiescent Current	1渭A (Max)
Pin Count	Number of Pins	14

Instructions for Use:

1. Power Supply:

   • Connect the Vcc pin to the positive supply voltage (2V to 6V).
   • Connect the GND pin to the ground.

2. Input Signals:

   • Ensure that input signals are within the specified voltage range (VIL to VIH).
   • Avoid floating inputs; use pull-up or pull-down resistors if necessary.

3. Output Signals:

   • The output can drive up to 10 standard CMOS loads.
   • Ensure that the load impedance is appropriate for the output current capability.

4. Handling:

   • Handle with care to avoid static damage.
   • Store in a dry, cool place when not in use.

5. Mounting:

   • Solder the component to the PCB using a temperature-controlled soldering iron.
   • Ensure proper alignment and orientation before soldering.

6. Testing:

   • Test the component using a multimeter or logic analyzer to verify correct operation.
   • Check for short circuits and open circuits on the PCB.

7. Storage:

   • Store in anti-static packaging to prevent damage from electrostatic discharge (ESD).

8. Environmental Considerations:

   • Operate the component within the specified temperature range to ensure reliable performance.
   • Avoid exposure to excessive humidity and corrosive environments.

(For reference only)