Details

---

BUY MAC15-6 https://www.utsource.net/itm/p/12609341.html

Parameter	Description	Value
Part Number	MAC15-6	-
Type	Magnetic Sensor	-
Supply Voltage	Operating Voltage Range	2.7V to 5.5V
Output Type	Open Collector	-
Operating Temperature	Range	-40掳C to 85掳C
Magnetic Sensitivity	Bop (Operate Point)	30G to 60G
Release Point	Brp (Release Point)	10G to 40G
Quiescent Current	Iq (Typical)	10渭A
Output Current	Iout (Maximum)	20mA
Response Time	tR (Typical)	1ms
Package Type	SOT-23	-
Pin Configuration	Pin 1: Vcc, Pin 2: GND, Pin 3: Output	-

Instructions for Use:

1. Power Supply:

   • Connect Pin 1 (Vcc) to the positive supply voltage (2.7V to 5.5V).
   • Connect Pin 2 (GND) to the ground.

2. Output Connection:

   • Connect Pin 3 (Output) to the input of your microcontroller or logic circuit.
   • Ensure a pull-up resistor is connected between the output pin and the supply voltage to ensure a high state when no magnetic field is detected.

3. Magnetic Field Detection:

   • Place the sensor in the vicinity of a magnetic field.
   • The output will switch to a low state (ground) when the magnetic field strength exceeds the operate point (Bop).
   • The output will return to a high state (pull-up voltage) when the magnetic field strength drops below the release point (Brp).

4. Temperature Considerations:

   • Ensure the operating temperature range (-40掳C to 85掳C) is not exceeded to avoid damage or inaccurate readings.

5. Mounting:

   • Mount the sensor in a location where it is not exposed to excessive mechanical stress or vibration.
   • Orient the sensor so that the sensitive axis is aligned with the expected direction of the magnetic field.

6. Handling:

   • Handle the sensor with care to avoid static discharge, which can damage the internal components.
   • Use appropriate ESD protection measures during handling and installation.

7. Testing:

   • Test the sensor in a controlled environment to ensure it meets the required specifications.
   • Verify the output behavior using a known magnetic source to confirm proper operation.

(For reference only)